Bosch L-BOXX Contractor: The Heavy-Duty Stackable Tool Storage System, Now in Singapore
The original Bosch L-BOXX became a standard on Singapore jobsites because it stacks, clicks together and fits Sortimo van racking. The L-BOXX Contractor range is the heavy-duty version: bigger cases, an IP65 seal against rain and dust, and a wheeled base that carries the whole stack. Bosch says the range is backward compatible with the L-BOXX cases you already own.
What changes from the standard L-BOXX
- IP65 sealing on the 170, 322 and 476 cases, so tools stay dry in the back of a lorry or on an open site.
- Impact-resistant polypropylene body with metal-reinforced corners and metal latches.
- One-hand decoupling from the front handle: lift a box off the stack without unclipping everything.
- Aluminium side rails that take Bosch ProClick pouches and holders.
- Padlock points on the hard cases.
- Bigger footprint: the hard cases are 432 x 559 mm, so there is room for full-size tools and 18V kits.
The eight pieces
Wheeled base: L-BOXX Contractor 476
The foundation of a mobile stack. 241 mm wheels handle kerbs and site debris, and the telescopic handle retracts fully. It is 530 x 559 x 476 mm, weighs 11.2 kg, takes up to 113 kg and comes with an open tray for small parts.
Hard cases: Contractor 322 and Contractor 170
The 322 (50 kg capacity, with open tray and side handles) suits drills, grinders and kits. The low 170 (35 kg) is for hand tools, bits and fixings. Both are IP65.
The bundle: L-BOXX Contractor Set 3
The 476, 322 and 170 together as one 936 mm high rolling stack. Bosch rates it for 198 kg in total. If you are buying all three, this is the simplest way to start.
Organisers: Drawer 3 and Rack 2
Drawer 3 has one 70 mm and two 140 mm drawers for screws, anchors and hand tools, so you do not have to unstack anything to reach them. Rack 2 holds two of your existing standard L-BOXX cases on sliders. Each one pulls out and opens without being removed from the stack.
Top of the stack: Crate and Backpack
The Crate is open with no lid, made for the tools you grab all day, and carries 25 kg. The Backpack has a moulded base that locks on top of any Contractor case. It has a hand-tool compartment, a document and device compartment, a laptop sleeve and a padded back.
Which setup fits your work?
- Electricians and M&E technicians: Set 3 plus Drawer 3 for fittings and terminals.
- Carpenters and fit-out crews: 476 base, 322 for power tools, Crate on top for daily hand tools.
- Service technicians moving between sites: 170 plus Backpack, light enough for MRT or a lift lobby.
- Teams with standard L-BOXXes already: Rack 2 brings your current cases into a Contractor stack.
Prices in Singapore
| Item | Part no. | Price (SGD, incl. GST) |
|---|---|---|
| Contractor Set 3 | 1600A037DY | $512 |
| Contractor 476 (wheeled) | 1600A037E1 | $277 |
| Contractor Drawer 3 | 1600A037E3 | $277 |
| Contractor Rack 2 | 1600A037E4 | $267 |
| Contractor 322 | 1600A037E0 | $141 |
| Contractor Backpack | 1600A037E5 | $125 |
| Contractor 170 | 1600A037DZ | $109 |
| Contractor Crate | 1600A037E2 | $76 |
Available from A.C.T. Hardware at two locations:
For stock checks or bulk orders, WhatsApp us at +65 8978 9808.