Makita 792691-8 Jig Saw Blade, Bayonet Type No. B-10S, Splinter-Free Thin Wood

Makita jig saw blade 792691-8, bayonet type No. B-10S, for splinter-free cuts in thin wood. Bayonet shank, fitting Makita jig saws and other T-shank saws.

What it is for

This is a finishing blade. The fine tooth pitch takes material away slowly but leaves a clean edge, which is what you want in veneered board, laminate, plywood and thin timber where the cut face will be seen.

Getting a clean cut

• A jig saw cuts on the upstroke, so splintering shows on the top face. Cut with the good side down.
• Run a slower speed and let the blade do the work. Pushing a fine blade causes it to flex and the cut to wander off square.
• Masking tape along the cut line reduces tear-out further on laminates.
• For fast rough cutting, use a coarse blade instead — this one will feel slow.

Tooth pitch, blade length and capacity are in the table below.

Product No. B-10S

See the full power tool accessories range, or WhatsApp us at +65 8978 9808.