NITECORE MT1A PRO - 800 LUMENS

For travel and everyday carry: runs a rechargeable 14500 over USB-C or any AA you can buy anywhere, so you are never stranded for power — 800 lumens, IP68 submersible.

800 lumens that never leaves you stranded for power.

Runs on a rechargeable 14500 over USB-C, or any AA battery you can buy anywhere. The first Nitecore light with the UHi 25 LED.

• 800-lumen output reaching 250 metres from the NiteLab UHi 25 LED
• Dual power: included NL1411R rechargeable 14500, or a single AA
• USB-C charging built into the included battery
• 93mm long, 52g with the battery in
• Dual-stage tail switch for one-handed control
• IP68 rated, 2m submersible, 2m impact resistant
• Aero-grade aluminium, HA III hard-anodised finish
• Two-way clip, tail-stand capable

Two ways to power it. Never caught flat.

Recharge it. The included NL1411R 1,100mAh 14500 charges over USB-C right inside the light and delivers the full 800 lumens, so a power bank is all you need on the road.

Or drop in an AA. When you are far from a charger, a single AA from any shop, garage or hotel desk keeps you running. Lithium, alkaline or rechargeable AA all work.

800 lumens, 250 metres, from a thumb-sized body.

The NiteLab UHi 25 LED drives 800 lumens and a 250-metre throw, a long reach for a light this small. A smooth reflector and precision optics keep the beam tight where you point it.

Three levels cover the work: a 50-lumen low for close tasks that runs up to 10 hours, a 300-lumen mid for walking, and the full 800-lumen high when you need to see across the car park or down the trail.

The first Nitecore light with the UHi 25 LED.

NiteLab developed the UHi 25 for professional portable lighting, with a round emitting surface that pushes high beam intensity and a clean, far-reaching beam. Paired with a smooth reflector and Precision Digital Optics, it gives the MT1A Pro the output and throw of a much larger torch in a body that disappears in a pocket.

One-handed control, dual-stage tail switch.

A full press turns the light on and off. A half press steps through the three brightness levels, so you set the output you want without losing your grip or your place. The U-shaped switch guards against accidental activation in a bag, and a brightness memory brings back your last level every time you switch on.

Built to take the trip with you.

The body is machined from aero-grade aluminium with an HA III hard-anodised finish that resists scratches, and a double-sided scratch-resistant lens coating keeps the beam clean. IP68 sealing handles 2 metres of submersion and the light shrugs off a 2-metre drop, so rain, rivers and the bottom of a bag are all a non-issue.

Technical Specifications:

LED: NiteLab UHi 25

Maximum Output: 800 lumens

Maximum Throw: 250 m

Peak Beam Intensity: 15,700 cd

Battery: 1 × NL1411R 14500 (included) or 1 × AA

Charging: USB-C (via NL1411R battery)

Body Material: Aero-grade aluminium, HA III hard-anodised

Waterproof / Dustproof: IP68, 2 m submersible

Impact Resistance: 2 m

Length: 93 mm / 3.66"

Head Diameter: 19.7 mm / 0.78"

Weight: 32 g (light only) / 52 g (with battery)

Sold per UNIT.