NITECORE AP01 - ULTRALIGHT ELECTRIC AIR PUMP (2.8 KPA)

A thumb-sized electric air pump that weighs 22 grams and runs off any USB-C power bank you already carry. Inflates and deflates air beds, sleeping pads, swim rings and life jackets, with five nozzles and a storage bag included.

KEY FEATURES

Total weight 22g / 0.78 oz (pump body only)

Ultra compact at 41mm × φ31mm (1.61" × φ1.22"), smaller than a lip balm

2.8 kPa max inflation and deflation pressure

220 L/min airflow rate for both directions

USB-C powered using any 5V/2A power bank or adapter

Five nozzles included, covering air beds, pillows, pads, swim rings and life jackets

PC shell rated to 2 metre impact drop

Single-button control, automatic shut-off after 20 minutes

DESIGN & FUNCTIONALITY

Pocket any gear loop - At 41mm tall and 31mm across, the AP01 slides into spare corners of hip belt pouches, sunglasses cases, or key pockets

22 grams, including the pump - Lighter than an AAA battery or folded bandana

Bring your own power - Runs directly off power banks already in your pack for shelf-ready storage and easy airline travel

Dual port design - Inflation and deflation run on separate ports, handling both jobs with one device

One-handed operation - Double-press the single button to start, short press to stop

VERSUS CONVENTIONAL PUMPS

Fits where other pumps cannot - Thumb-sized versus lunch-box sized conventional models

Runs on gear you already carry - Uses existing USB-C power bank instead of sealed internal batteries

Handles both jobs - Inflates sleeping pads in evening and deflates in morning for clean pack-down

Fills while you set up camp - Fills air pillow in approximately 22 seconds of hands-off running

PERFORMANCE SPECIFICATIONS

Max Inflation / Deflation Pressure: ±2.8 kPa

Airflow Rate: 220 L/min

Runtime: 3 hours (with NB10000)

Power Input: USB-C, 5V⎓2A

Auto Shut-off: After 20 minutes of continuous use

Shell Material: PC (polycarbonate)

Impact Resistance: 2 metres

Dimensions: 41mm × φ31mm (1.61" × φ1.22")

Weight: 22g / 0.78 oz (accessories not included)

Operating Temperature: -10°C to 40°C (14°F to 104°F)

Storage Temperature: -20°C to 60°C (-4°F to 140°F)

INFLATION PERFORMANCE (with NB10000 power bank at 26°C)

Air Pillow: ~22 seconds per cycle, ×430 cycles per charge

Adult Swimming Ring: ~22 seconds per cycle, ×430 cycles per charge

Single Sleeping Pad: ~75 seconds per cycle, ×120 cycles per charge

Double Air Bed: ~7 minutes per cycle, ×22 cycles per charge

NOZZLES INCLUDED

Wide & Narrow Nozzles - Fit inflation valves on air beds, air pillows and air sofas

Silicone Nozzles (Size S & M) - Seal against balloons, inflatable sleeping mattresses and vacuum storage bags

Pinch Nozzle - Matches pinch valves on inflatable life jackets and swimming rings

COMPATIBLE INFLATABLES

Low-pressure bedding: Air beds, air pillows, air sofas

Sleeping pads & mattresses: Inflatable sleeping pads, camping mattresses

Water gear: Adult swimming rings, inflatable life jackets

Storage: Vacuum storage bags, balloons

Not suitable for: Car tyres, bike tyres, sports balls (high pressure above 3 kPa)

WHAT'S IN THE BOX

1x Nitecore AP01 Air Pump - Pump body with dual inflation and deflation ports

5x Nozzles - Wide, narrow, silicone S, silicone M, and pinch heads

1x USB-C to USB-C Charging Cable - For connecting to power bank or USB adapter

1x Drawstring Storage Bag - Keeps pump and all five nozzles together

Note: Power bank is not included

Sold per UNIT.