{"product_id":"nitecore-edc29-6500-lumens","title":"NITECORE EDC29 - 6500 LUMENS","description":"\u003cp\u003eFor everyday carry, security and first response: a slim, flat light that draws fast and puts out 6,500 lumens of wide flood plus a 400-metre search beam — with an OLED screen that shows exactly how much runtime you have left.\u003c\/p\u003e\u003cp\u003e6,500 lumens and a 400-metre reach, in a flat light that disappears into a pocket.\u003c\/p\u003e\u003cp\u003eA slim, dual-LED EDC light with an OLED runtime display and USB-C charging, ready to draw in seconds.\u003c\/p\u003e\u003cp\u003e🏅 Winner of the Red Dot Design Award 2025\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6,500-lumen Lumin Shield flood and a 3,000-lumen, 400m Search beam\u003c\/li\u003e\n\u003cli\u003eTwo NiteLab UHi 20 MAX LEDs, 40,230cd peak intensity\u003c\/li\u003e\n\u003cli\u003eMultifunctional OLED display: brightness, runtime and battery at a glance\u003c\/li\u003e\n\u003cli\u003eBuilt-in 2,500mAh battery, USB-C full charge in about 1 hour 15 minutes\u003c\/li\u003e\n\u003cli\u003eDual-stage tactical buttons with two Rapid Lock lockout modes\u003c\/li\u003e\n\u003cli\u003eProximity sensor steps output down to guard against overheating\u003c\/li\u003e\n\u003cli\u003e61 hours on Ultralow, 13 hours on Low\u003c\/li\u003e\n\u003cli\u003eIP54 and 1m impact resistant, 160g and 133.5mm long\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTWO LEDs, TWO JOBS: A WALL OF LIGHT OR REAL REACH\u003c\/p\u003e\u003cp\u003eThe two NiteLab UHi 20 MAX LEDs drive a 6,500-lumen Lumin Shield flood that fills a room, a yard or a car park in one press. Switch to Search and the beam concentrates into a 400-metre throw at 40,230 candela to pick out a figure or a sign across a field.\u003c\/p\u003e\u003cp\u003eStep down to a 1,200-lumen High for everyday tasks, or a 100-lumen Low that reads a map and still runs for 13 hours, so one slim light covers the close work and the far look.\u003c\/p\u003e\u003cp\u003eA 6,500-LUMEN FLOOD THAT LIGHTS THE WHOLE SCENE AT ONCE\u003c\/p\u003e\u003cp\u003eLumin Shield throws a wide, even wall of light rather than a narrow hotspot, so a stairwell, a back garden or a roadside fills with light the moment you switch on. The spread covers your full field of view, which is exactly what you want when you need to read a situation fast.\u003c\/p\u003e\u003cp\u003eIt is a broad working beam for close and mid-range tasks, ready on a single press for everyday checks or an unexpected emergency.\u003c\/p\u003e\u003cp\u003eSEARCH MODE REACHES 400 METRES WHEN YOU NEED DISTANCE\u003c\/p\u003e\u003cp\u003eActivate the two primary cores on their own and the EDC29 punches out a 3,000-lumen beam at 40,230 candela, throwing usable light to 400 metres. That is enough reach to scan a perimeter, check the far end of a property, or spot a trail marker well before you get to it.\u003c\/p\u003e\u003cp\u003eIt is the kind of throw normally reserved for larger tactical lights, here in something that still rides flat in a pocket.\u003c\/p\u003e\u003cp\u003eA DISPLAY THAT TELLS YOU EXACTLY WHERE YOU STAND\u003c\/p\u003e\u003cp\u003eThe multifunctional OLED screen reads out the current brightness level and battery voltage, the runtime remaining at that level, the power left, and the lockout status. A glance tells you whether you have ten minutes or ten hours before you head out.\u003c\/p\u003e\u003cp\u003eIt turns the EDC29 from a light you hope will last into one you know will, which is what a carry or response light should do.\u003c\/p\u003e\u003cp\u003eDUAL-STAGE BUTTONS THAT WORK THE WAY YOU DO\u003c\/p\u003e\u003cp\u003eTwo dual-stage tactical buttons sit at the tail for one-handed control. A half-press steps through brightness levels and a full-press switches the light on or off, so you set the output you want and fire it by feel.\u003c\/p\u003e\u003cp\u003eThe second button is customisable for direct access to Lumin Shield, Strobe or Search, putting your most-used mode one press away when a moment matters.\u003c\/p\u003e\u003cp\u003eTWO LOCKOUT MODES KEEP IT FROM FIRING BY ACCIDENT\u003c\/p\u003e\u003cp\u003eSemi Lockout disables the power button while keeping the customisable button live for direct Lumin Shield, Strobe or Search, so the light stays ready but never switches on by itself in a pocket or bag.\u003c\/p\u003e\u003cp\u003eFull Lockout disables both buttons for long-term storage or transport, so 6,500 lumens never wakes up against your leg and drains the battery before you need it.\u003c\/p\u003e\u003cp\u003ePRESET THE BRIGHTNESS BEFORE YOU SWITCH ON\u003c\/p\u003e\u003cp\u003eHalf-press the power button to set the brightness level before the light is even on, so it comes up at exactly the output the moment calls for. A soft glow to check a map in comfort, or full power the instant a search starts, with no scrolling through modes to get there.\u003c\/p\u003e\u003cp\u003e2,500mAH BUILT IN, FOR DAYS OF LOW-LEVEL RUNTIME\u003c\/p\u003e\u003cp\u003eThe built-in 2,500mAh cell feeds both LEDs and still leaves 61 hours on Ultralow or 13 hours on Low between charges. Everything is sealed in the body, so there are no spare cells to source and nothing to swap in the field.\u003c\/p\u003e\u003cp\u003eWhen it does run down, the USB-C port refills it from flat to full in about 1 hour 15 minutes on a 5V\/2A adapter, from the same charger your phone uses.\u003c\/p\u003e\u003cp\u003eA PROXIMITY SENSOR THAT WATCHES THE HEAD FOR YOU\u003c\/p\u003e\u003cp\u003eWhen the light is off and the head ends up against fabric or a pocket lining, the sensor steps the output down if it switches to High by accident, so the bezel stays cool and the battery stays charged.\u003c\/p\u003e\u003cp\u003eAdvanced Temperature Regulation works the same way during use, easing output back as the head warms so the light stays comfortable to hold through a long task.\u003c\/p\u003e\u003cp\u003eSTAINLESS STEEL AND CARBON FIBRE, WITH A GRIP THAT HOLDS\u003c\/p\u003e\u003cp\u003eStainless-steel shells front and rear lock onto a carbon-fibre composite frame, finished in PVD titanium coating for a body that takes knocks and stays looking the part.\u003c\/p\u003e\u003cp\u003eThe armor-style anti-slip texture wraps the sides for a secure hold barehanded or in gloves, in the rain or with cold hands, so the light stays put when you draw it in a hurry.\u003c\/p\u003e\u003cp\u003eSLIM, FLAT AND QUICK TO DRAW\u003c\/p\u003e\u003cp\u003eAt 133.5mm long and 160g, the flat profile and deep-carry pocket clip sit flush in a pocket, a vest or on MOLLE webbing, rather than rolling around like a round-bodied torch. It draws clean and fast when you reach for it.\u003c\/p\u003e\u003cp\u003eA large lanyard hole takes 4mm 550 paracord, so you can run it on a wrist loop or clip it to a kit bead for a carry that suits the way you work.\u003c\/p\u003e\u003cp\u003eBUILT TO SHRUG OFF DUST, RAIN AND DROPS\u003c\/p\u003e\u003cp\u003eThe EDC29 is rated IP54 against dust and splashing water and survives a 1-metre drop onto a hard floor, so a sudden shower or a knock off a bench is a non-event.\u003c\/p\u003e\u003cp\u003eIt is sealed for everyday weather rather than submersion, which is exactly the protection an EDC light needs day to day.\u003c\/p\u003e\u003cp\u003eWHY THE EDC29 OVER AN ORDINARY POCKET LIGHT\u003c\/p\u003e\u003cp\u003eFlood and throw in one - A 6,500-lumen wide flood and a 400m Search beam from twin LEDs, where most pocket lights give you one or the other.\u003c\/p\u003e\u003cp\u003eYou know your runtime - The OLED display shows output, battery and remaining time, so you are not caught short mid-task. Most lights leave you guessing.\u003c\/p\u003e\u003cp\u003eCarries flat - A slim 133.5mm body and deep-carry clip sit flush in a pocket, instead of the round barrel that rolls off a table.\u003c\/p\u003e\u003cp\u003eReady when you grab it - USB-C charging, two lockout modes and a 61-hour Ultralow mean it is charged, safe in a pocket and good for a long night.\u003c\/p\u003e\u003cp\u003eWHO CARRIES THE EDC29\u003c\/p\u003e\u003cp\u003eEveryday Carry - A flat body and clip that ride in a pocket all day, a 15-lumen Ultralow for close work and 6,500 lumens when you need it.\u003c\/p\u003e\u003cp\u003eSecurity \u0026amp; Patrol - Quick draw, a 400m Search beam for perimeter scans and a wide flood for stairwells, doorways and car parks.\u003c\/p\u003e\u003cp\u003eEMS \u0026amp; First Response - Instant high output, a runtime display you can trust on shift and a slim body that slides into a kit pocket.\u003c\/p\u003e\u003cp\u003eOutdoors - A 400m throw across a trail or campsite, 13 hours on Low for a long night and IP54 sealing for the weather.\u003c\/p\u003e\u003cp\u003eOUTPUT AND RUNTIME TABLE:\u003c\/p\u003e\u003cp\u003eMode | Lumens | Runtime | Distance | Intensity\u003c\/p\u003e\u003cp\u003eLumin Shield Flood | 6,500 | — | 370 m | 35,360 cd\u003c\/p\u003e\u003cp\u003eSearch Spotlight | 3,000 | — | 400 m | 40,230 cd\u003c\/p\u003e\u003cp\u003eHigh | 1,200 | 2h | 190 m | 8,952 cd\u003c\/p\u003e\u003cp\u003eMid | 400 | 3h | 100 m | 2,496 cd\u003c\/p\u003e\u003cp\u003eLow | 100 | 13h | 68 m | 1,158 cd\u003c\/p\u003e\u003cp\u003eUltralow | 15 | 61h | 30 m | 230 cd\u003c\/p\u003e\u003cp\u003eStrobe | 6,500 | — | — | —\u003c\/p\u003e\u003cp\u003eMaximum output is a burst. Lumin Shield, Search and Strobe are high-output modes; Advanced Temperature Regulation steps output down as the head warms to protect the LEDs. High at 1,200 lumens is the level for sustained work. Figures are ANSI\/PLATO FL1 2019 rated.\u003c\/p\u003e\u003cp\u003eTECHNICAL SPECIFICATIONS:\u003c\/p\u003e\u003cp\u003eLED: 2 × NiteLab UHi 20 MAX\u003c\/p\u003e\u003cp\u003eMax Output: 6,500 lumens\u003c\/p\u003e\u003cp\u003eMax Throw: 400 m (Search)\u003c\/p\u003e\u003cp\u003ePeak Intensity: 40,230 cd\u003c\/p\u003e\u003cp\u003eReflector: OP (orange peel)\u003c\/p\u003e\u003cp\u003eBattery: Built-in 2,500mAh Li-ion\u003c\/p\u003e\u003cp\u003eCharging: USB-C, full in ~1h 15min (5V\/2A)\u003c\/p\u003e\u003cp\u003eDisplay: Multifunctional OLED\u003c\/p\u003e\u003cp\u003eBody: Stainless steel \u0026amp; carbon fibre, PVD titanium coating\u003c\/p\u003e\u003cp\u003eWater Resistance: IP54 (splash \u0026amp; dust resistant)\u003c\/p\u003e\u003cp\u003eImpact Resistance: 1 m\u003c\/p\u003e\u003cp\u003eDimensions: 133.5 mm length × 34.6 mm head\u003c\/p\u003e\u003cp\u003eWeight: 160 g (5.64 oz)\u003c\/p\u003e\u003cp\u003eFREQUENTLY ASKED QUESTIONS:\u003c\/p\u003e\u003cp\u003eCan I use the EDC29 while it is charging?\u003c\/p\u003e\u003cp\u003eIt is built for charge-then-carry rather than running on the cable. Plug it into the USB-C port to refill the built-in 2,500mAh battery, then unplug and head out. A full charge takes about 1 hour 15 minutes on a 5V\/2A adapter.\u003c\/p\u003e\u003cp\u003eHow do I know it will last my shift?\u003c\/p\u003e\u003cp\u003eThe OLED screen shows the runtime remaining at your current brightness alongside the power left in the battery, so you can read at a glance whether you have minutes or hours before a top-up. Plan a shift around that countdown and you carry without guessing how much light is in reserve.\u003c\/p\u003e\u003cp\u003eHow long does it hold a charge in a drawer?\u003c\/p\u003e\u003cp\u003eAdvanced Power Cut-Off technology drops standby current to about 1 microamp, so the EDC29 stays ready for roughly a year between charges when it is sitting unused. Top it up before a trip and it is good to go.\u003c\/p\u003e\u003cp\u003eWhat's In The Box:\u003c\/p\u003e\u003cp\u003e1x Nitecore EDC29 - 6,500 lumen slim EDC flashlight with built-in battery\u003c\/p\u003e\u003cp\u003e1x Lanyard\u003c\/p\u003e\u003cp\u003e1x USB-C Charging Cable\u003c\/p\u003e\u003cp\u003eFlood, throw and 6,500 lumens, flat in a pocket.\u003c\/p\u003e\u003cp\u003eSold per UNIT.\u003c\/p\u003e","brand":"NITECORE","offers":[{"title":"Default Title","offer_id":67596777029731,"sku":"NTC-EDC29","price":219.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/7040\/6243\/files\/NITECORE-EDC29-1.jpg?v=1790661213","url":"https:\/\/acthardware.store\/products\/nitecore-edc29-6500-lumens","provider":"A.C.T. HARDWARE","version":"1.0","type":"link"}